Route items from a drill to a receiver
Connect a producing drill to an accepting receiver with conveyors facing along the route. If items stop, trace the route to the first blocked transfer instead of adding drills immediately.
Version: v146
Before you start
- Research Conveyor under the starting core: 5 copper for research, then 1 copper per placed block.
- A producing drill or factory and a destination that accepts its output.
Steps
- Select Conveyor and drag a connected line from the producer toward the destination. Use the scroll wheel to rotate its direction.
- Check every turn: the front of one segment must lead into the next. Do not point a turn back toward the producer.
- Place the final conveyor facing the core or machine. A factory only accepts its own valid ingredients; aiming a belt at it is not enough if the item is wrong.
- For an empty line, check the producer and first connection. For a line containing stalled items, follow it to the first transfer that does not move and inspect the next tile and receiver.
- When two lines must cross, use a researched Junction. When one line must distribute to adjacent receivers, use a researched Router. Neither fixes a full destination.
Success: Items travel through every turn and enter the intended receiver.
Version and scope
Mindustry v146, unmodded Serpulo on desktop. Based on official tutorial text and game source; not a recorded gameplay test.
Connection diagram
Read each arrow as the direction items must travel. At a turn, the belt must continue toward the receiver. This is a connection schematic, not a map-specific blueprint.
